How to flash a magazine?
In office work it is necessary to work constantlywith a bunch of documentation, which is proof of the economic activities of the enterprise. And any clerk must know how to properly flash the magazine to take into account the workflow. And most importantly in the conduct of journals is the continuous recording of documents, with mandatory registration in the journals of incoming and outgoing securities of the enterprise.
How to properly flash a magazine
The log is stitched along the left margin so thatthreads did not interfere with the document. To do this, 3 holes are punched on the left, symmetrically along the entire height of the sheets, along the vertical, with an awl. Then all the pages of magazines are stitched with thread or bank twine, preferably 2 times. The tips of the threads, no less than 6-7 cm, are issued on the back of the magazine or on the last sheet, if the cover is too thick and not punched with an awl.
These loose ends are glued to the papera sticker measuring 3-4 cm so that it covers only a part of the thread. The ends should be visible. On the sticker, you need to make a verifying inscription that literally says the following: "N-number of sheets (date, signature)" is stitched, numbered and sealed with a seal. " This should be the signature of the head or person whose authority includes the registration of workflow in this journal. Then put a seal that must leave the print as on a paper sticker with a verbatim inscription, and on the cover or sheet of the magazine to which the loose ends of the thread are glued.
How to flash a log
Any magazine must necessarily benumbered starting from the first page. You can number each page of the magazine, or you can number the pages stitched in the magazine. In the first case, in the inscription, the note "Numbered, numbered and sealed with the N-number of pages (date, signature)" is made, and in the second - "sheets". The number of pages or sheets is indicated, both in numerical value, and in words.